The Accutrend Plus instrument
26
Power
To save power, the instrument powers itself off after 2 minutes unless a button is pressed or a new test strip is
inserted. When the instrument turns itself off, all test results obtained so far remain in the memory. With a set of
fresh batteries, you will normally be able to perform approximately 1,000 measurements. When the battery warning
is displayed for the first time, approximately 50 measurements can still be performed, but replace the batteries as
soon as possible.
When replacing batteries, you must insert new batteries within 2 minutes to keep the set date and time. If this time
period is exceeded, you must re-eneter the date and time. Use only AAA alkaline batteries.
Measurement results, including the related measurement date and time, as well as all over instrument settings,
remain stored even when no batteries are inserted.
Please respect the environment and discard used batteries according to your local regulations and laws.
Do not throw batteries onto an open fire. There is a risk of explosion.