Instrument settings
34
2 The date and time as well as the set symbol
now appear on the display. To actually make or
change settings, press the Set button again,
located on the left side of the instrument
To leave the set mode (this is only possible if a
date and time setting is made), press the On/Off
button
.
Note: If the meter display reads dEL
LASt
you have entered the set mode incorrectly
and reached a mode we do not recommend.
To exit this mode and enter the set mode
correctly, immediately turn off the meter by
pressing and holding down the On/Off
button
. After the meter is powered off,
press the Set button twice to enter the set
mode and then continue to the next step.
To Next Page
Loading...
Need help?
General