Performing a measurement
50
A Test strip (top side, CHOL in the example)
Contains the application area.
B Application area
Apply the sample here.
C Test strip (bottom side)
The imprinted barcode is used to identify the type
and lot of the test strip.
D Reaction area
Used to visually check whether blood was
applied correctly.
E Code strip (top side, CHOL in the example)
Supplied with each test strip container.
F Code strip (bottom side)
The imprinted barcode contains lot-specific
information which is read and stored in the instru-
ment.
To Next Page
Loading...