Page | 21
TCM Service (AP3-NIS-006 and AP3-NIS-008 only)
Contains Clutch Gear Learn and Touch Point Adjust functions. For more information on TCM Service
functions, please refer to TCM Adjustments (Page 23).
TPMS Learning
TPMS Learning is used to register new TPMS sensors. For more information on TPMS Learning, please
refer to TPMS Learning (Page 24).
I/M Readiness
Use this feature to read Inspection / Maintenance (I/M) test statuses of your vehicle. To read I/M, Select
Troubleshooting from the main menu. Then, scroll to I/M Readiness. You will see an extensive list of
readiness monitors.
To Next Page
Loading...
