Page | 27
Button Help: Displays the button map.
Icon Help: Displays the various icons you will find on the Accessport.
Demo Mode: This function allows you to run through a mock installation and see all of the features of
the Accessport without needing to be connected to a vehicle.
Recovery Mode
If an error occurs during a reflash the Accessport and ECU will enter recovery mode. By selecting this
option the Accessport will recover itself to the last selected or installed map.
NOTE: For Recovery Mode to function correctly, you will need to ensure that whatever condition
caused the initial failure of the reflash is resolved. For example, if your battery voltage dropped too low
during the reflash, put a battery charger on the car before attempting to use Recovery Mode.
To Next Page
Loading...
