DIGIMINI EMEA/APAC/AUSTRALIA REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 11-Oct-15 www.cobham.com/wireless
Document number: 00030UMCD Rev. 5.0
Page | 6-1
6 ADMINISTRATION, MONITORING AND
TROUBLESHOOTING
This chapter describes the following:
• Basic administration operations such as uploading license files and upgrading features
• Description of repeater GUI alarms and front panel LEDs
6.1 Administrative Operations
This section includes the following:
• License file upload
• Single-band to dual-band upgrade
• Upgrade to support connection to Ethernet and an External Modem
6.1.1 License File Upload
This section describes how to upload a license file to the repeater. License files are used to upgrade
the repeater to support additional features such as dual-band (for single-band repeaters) and
support for basic remote monitoring.
NOTE: Each feature is implemented using a DEDICATED license file.
To upload a license file
1. Contact your Cobham Wireless service representative and purchase the option.
NOTE: You will be required the System ID listed in the Band Info tab (section
5.3.2.2).
2. Once the appropriate license file is available, save the file to an accessible directory.
3. Open a session to your repeater and select the License tab.
4. Browse for the file (Choose File) and then click Upload.
Figure 6-1. License for Updating to Dual-band
then Upload
To Next Page
