COBHAM SAILOR 6282 - Page 42

Settings
30 Chapter 2: Operation 98-135323-H
Channel Management
The AIS channel is preset. If required, the AIS parameters (up to 8 sets) can be
changed. The AIS parameters can be changed as follows:
• AIS message 22 with new parameters (set automatically in the SAILOR 6282
AIS Transponder).
• Through a received DSC message with new parameters (set automatically in
the SAILOR 6282 AIS Transponder).
• Manual input of new parameters, e.g. you have received the new parameters
in a text message or via VHF radio.
The SAILOR 6282 AIS Transponder decides which of the frequencies to use.
Entering new AIS parameter set manually
To enter a new area do as follows:
1. Unlock the page by tapping Authorize changes and entering the user-level
password.
2. Tap New Area and fill in the following parameters:
• Set Area
• NE Latitude
• NE Longitude
• SW Latitude
•SW Longitude
• Channel A Frequency
•Channel A RX
Figure 23: Settings – Channel Management
Swipe
up or
down