Settings
98-135323-H Chapter 2: Operation 31
•Channel A TX
• Channel B Frequency
•Channel B RX
•Channel B TX
• Transition zone
•High Power
Internal GNSS (read only)
You can view the current signal levels from the GPS satellites.
Tap Internal GNSS.
Silent Mode
Use Silent Mode only if it is necessary to be invisible, e.g. in a pirate situation in
international waters.
Figure 24: Settings – Internal GNSS
Enabling Silent Mode violates the IMO regulation for GMDSS.
Using Silent Mode will make your vessel non-compliant to the
IMO carriage requirements and is only allowed under special
circumstances. This action must be recorded in the ship’s log.
To Next Page