Codan 2110 User Manual (English)

Other manuals for Codan 2110

Questions and Answers:

T
Thomas BauerAug 2, 2025
Why are my Codan 2110 communications not clear?
- K
  Katherine BoyleAug 3, 2025
  If your Codan Transceiver communications aren't clear, try switching to another channel. When using a whip or long wire antenna, ensure the antenna selection icon is set to ATU or ATU/50. For short-distance communication, try laying the whip horizontally for near vertical incident skywave operation or switch to a long wire antenna. If the issue persists, switch to a dipole or broadband antenna and ensure the antenna selection icon is set to 50 or ATU/50. Remember to press PTT.
R
Rachel RamseyAug 8, 2025
What to do if I get a burn from the handset when I press PTT on my Codan 2110?
- T
  Thomas AndersonAug 8, 2025
  If you get a burn from the handset when you press PTT on your Codan Transceiver, it indicates that the transceiver isn't adequately earthed. To resolve this, attach a counterpoise as per the instructions provided with the antenna.
K
Kellie RiosAug 14, 2025
Why is the GPS not working on my Codan 2110?
- R
  Ryan RothAug 14, 2025
  If the GPS on your Codan Transceiver isn't working, make sure that the front panel of the transceiver, where the GPS antenna is located, is facing the sky so it can receive signals from satellites.
J
Jeremy AguilarAug 20, 2025
How to fix muffled sound from the front panel speaker of Codan 2110 Transceiver?
- M
  matthewandrewsAug 20, 2025
  To address the muffled sound from the front panel speaker of your Codan Transceiver, drain any moisture from the front panel by turning it upside down.