2110 SSB Transceiver compliance
2110 SSB Transceiver Getting Started Guide 5
European Radio and Telecommunications
Terminal Equipment Directive
The 2110 SSB Transceiver has been tested and complies with
the following standards and requirements (articles of the
R&TTE Directive):
• Article 3.1b: ETSI EN 301 489-1
• Article 3.1b: ETSI EN 301 489-15
• Article 3.2: Australian type approval according to
AZ/NZS 4770:2003
• Article 3.1a: assessed against ICNIRP requirements
• Article 3.1a: EN 60950
Compliance with these standards is deemed sufficient to fulfil
the requirements of the R&TTE Directive 1999/5/EC.
Product marking and labelling
Any equipment supplied by Codan that satisfies these
requirements is identified by the , or
markings on the model label of the product.
Declaration of Conformity and Expert Letter of
Opinion
The CE Declaration of Conformity and Expert Letter of
Opinion for this product is listed on page 73, Associated
documents. This document can be made available upon
request to Codan or a Codan-authorised supplier.
0191 0191
To Next Page
Loading...
Need help?
General
