2110 SSB Transceiver Getting Started Guide 43
CODAN
6 Troubleshooting
Below is a checklist for basic troubleshooting.
Check that:
• all connectors are dry and free of dirt
• all connections are sound
• the battery is connected to the transceiver and has some
charge
• the selected antenna is appropriate for the distance over
which you want to communicate
• the antenna is deployed correctly, oriented in a suitable
direction, and connected to the transceiver
• the grounding system is adequate as per instructions
provided with the antenna
• the antenna selection icon on the front panel screen
matches the type of antenna you are using
If required, restart your transceiver to invoke self-testing. The
self-test checks the memory, hardware, LCD and keys.
If a serious fault is reported, contact your Codan
representative.
Table 5 contains some general tips for troubleshooting your
transceiver.
To Next Page
Loading...
