Preparing the 2110 SSB Transceiver for use
20 2110 SSB Transceiver Getting Started Guide
Inserting the transceiver into a backpack
All backpacks come with adjustable straps that hold the
transceiver firmly in position. Some backpacks have an
internal mounting frame.
To insert the transceiver into a backpack with an internal
mounting frame:
1 Open the rear of the backpack to expose the mounting
frame.
1 Push the transceiver between the foam mounts on the
frame.
1 Secure the transceiver with the two adjustable straps.
1 Close the rear of the backpack.
To insert the transceiver into the soft backpack:
1 Slide the transceiver into the backpack.
1 Secure the transceiver with the adjustable strap on the
outside of the backpack.
To Next Page
Loading...
Need help?
General
