Getting started
34 2110 SSB Transceiver Getting Started Guide
Switching on the transceiver
To switch on the transceiver:
1 Press .
If you are prompted to enter a password, enter your user
or administrator password, then press .
If you enter an incorrect password it is automatically
erased. If you enter an incorrect password three times the
transceiver automatically switches off.
When the transceiver is switched on, it runs a self-test
that checks the memory, hardware, LCD and keys.
Switching off the transceiver
To switch off the transceiver:
1 Hold .
The transceiver is switched off.
NOTE
Prior to operational use, you should connect an
antenna to the transceiver (see page 21,
Selecting an appropriate antenna, and the Quick
Reference Card supplied with the antenna).
To Next Page
Loading...
Need help?
General
