Definitions
2110 SSB Transceiver Getting Started Guide 69
Get Position call A call that gets the GPS position of a
specific station.
Get Status call A call that gets diagnostic or configuration
information about the transceiver at a
specific station.
front panel The interface that is used to control the
functions of the 2110 SSB Transceiver. It
consists of a display, keypad and connectors
for the handset, antenna, ancillary
equipment, and earthing.
hot key A key on the front panel that is pre-
programmed with a macro that enables you
to perform a task quickly.
Last Heard Log A log of the last 100 on-air transmissions
detected by the current station.
The Last Heard Log is available if the MIL-
STD-188-141B ALE option is installed.
listen before
transmit
If enabled, the automatic process that the
transceiver uses to detect whether or not
there is traffic on a channel and, when
necessary, select another channel or inform
the user that the channel is busy.
LQA beacon A Channel Test call made in an
ALE/CALM network using a Group
Selective or NET address syntax. On
completion of the beacon, the information
collected replaces the information for the
channel stored in the LQA database. It is
sometimes referred to as an ALE beacon.
The LQA beacon is available if the MIL-
STD-188-141B ALE option is installed.
This term Means...
To Next Page
Loading...
Need help?
General
