8-4 Appendices X-2 Technical Service Manual
Publication No: 15-02047
B.2 Ordering Information
Orders for replacement components must include the following information.
This will ensure that the correct parts are supplied and help speed up
delivery times.
1. Equipment type (e.g. Type X-2 Transceiver).
2. Component location (e.g. Rx/Exciter & Control PCB, 08-04840).
3. Component circuit reference number (e.g. R74).
4. Full component description (e.g. Resistor 470Ω 5% 0,33W CF Res).
5. Manufacturer (e.g. Philips)
6. Manufacturer's Part Number (e.g. 2322 211 13471).
7. CODAN Part Number (e.g. 40-24700-020).
B.3 Component Substitution
When replacing general purpose components (resistors, capacitors etc.),
equivalent parts from other manufactures may be used provided they have
similar tolerances, voltage/power rating and temperature coefficients as
those of the specified part.
Substituting components which do not exactly match those listed in the
parts list will not adversely affect equipment performance.
B.4 Parts Lists
Four parts lists can be found in this section as shown in Table B.2.
Page Title Assembly No
8-5 Sundry Parts 08-04843
8-6 Front Panel Assembly 08-04842-000
8-8 Rx/Exciter & Control 08-04840-001
8-18 PA and Chassis Assembly 08-04841-001
Table B.2 Parts list index
To Next Page
Loading...
