Electromagnetic Immunity Standards and Test Levels
Safety Precautions
• Never connect the device’s external power supply to any outlet or power supply that has a
voltage or frequency different than that specified (100 – 240 VAC, 50/60 Hz). Use only the
external power supply provided with the device (Codonics part Number SLS-PS).
• When replacing the device, always power it down (refer to “Powering Off the System”) and
disconnect the AC power cord prior to servicing it.
• Damage to a power cord is a fire and shock hazard. When unplugging a power cord, hold it
by the plug only and remove the plug carefully.
• If a power cord or external power supply needs to be replaced, replace it only with another
Codonics power cord or Codonics external power supply. Alternatively, replace it with a
power cord or external power supply manufactured specifically for your power
configuration.
To Next Page
Loading...