ComAp IG-NT - Page 212

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
212
ManualLdRecon.
NOTE:
Learn more about load shedding in the separate chapter Load shedding.
Group: Timer settings
Setpoint: Timer channel 1
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #1. Output from this channel
is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 2
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #2. Output from this channel
is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 3
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #3. Output from this channel
is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 4
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #4. Output from this channel