ComAp IG-NT - Available Firmware and Archive Sets

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
9
Available Firmware and Archive sets
Since version 3.0 of IGS-NT Standard firmware is the Firmware differentiated for InteliGen NT GC and
InteliGen NT BaseBox type controllers. For suitable firmware for your controller please consult this table:
Firmware (*.mhx)
For IG-NT-GC and IG-NTC-GC
For IG-NT-BB and IG-NTC-BB
For IS-NT-BB and IS-NTC-BB
IG-NT-GC-3.0
IG-NT-BB-3.0
IS-NT-3.0
Archives (*.ant)
For IG-NT(C) GC
For IG-NT-BB and IG-NTC-BB
For IS-NT-BB and IS-NTC-BB
IG-GC-SPTM-3.0
IG-BB-SPTM-3.0
IS-SPTM-3.0
IG-GC-SPI-3.0
IG-BB-SPI-3.0
IS-SPI-3.0
IG-GC-MINT-3.0
IG-BB-MINT-3.0
IS-MINT-3.0
IG-GC-COMBI-3.0
IG-BB-COMBI-3.0
IS-COMBI-3.0
IG-GC-COX-3.0
IG-BB-COX-3.0
IS-COX-3.0
IG-GC-MINT-Marine-3.0
IS-MINT-Marine-3.0
Some features are available only in InteliGen NT Basebox, InteliGen NTC Basebox and InteliSys NT. These
features are highlighted by green background.