ComAp IG-NT - Force Value Settings; Force Value Configuration Parameters

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
80
21. SDVentil time
22. Fuel solenoid
23. FuelSol offset
24. D+ Function
25. Bin selector 1
26. Bin selector 2
27. Bin selector 3
28. Bin selector 4
29. MaxLevelDrop
Setpoints - Engine Protect
1. Horn timeout
2. RunOnlyBlkDel1
3. RunOnlyBlkDel2
4. RunOnlyBlkDel3
5. BinInp delay 1
6. BinInp delay 2
7. BinInp delay 3
8. ForceBlockDel1
9. ForceBlockDel2
10. ForceBlockDel3
11. ResetActAlarms
12. Overspeed
13. Service time 1
14. Service time 2
15. Service time 3
16. Service time 4
17. Max+CylDifPmin(for IS-NT only)
18. Max-CylDifPmin(for IS-NT only)
19. Max+CylDifPnom(for IS-NT only)
20. Max-CylDifPnom(for IS-NT only)
21. PminCylDifEval(for IS-NT only)
22. CylDifEvalDel(for IS-NT only)
Setpoints - Force value
1. Force value 1
2. Force value 2
3. Force value 3
4. Force value 4
5. Force value 5
6. Force value 6
7. Force value 7
8. Force value 8
9. Force value 9
10. Force value 10
11. Force value 11
12. Force value 12
13. Force value 13
14. Force value 14
15. Force value 15
16. Force value 16
17. ExtValue1LoLim
18. ExtValue2LoLim
19. ExtValue3LoLim
20. ExtValue4LoLim
21. ExtValue1HiLim