ComAp IG-NT Reference Guide

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
277
Description
This input is used to disable temporarily the output from the Timer channel #5.
NOTE:
See also the setpoint TimerChannel 5 and output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 6
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #6.
NOTE:
See also the setpoint TimerChannel 6 and output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 7
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #7.
NOTE:
See also the setpoint TimerChannel 7 and output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 8
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #8.
NOTE:
See also the setpoint TimerChannel 8 and output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 9
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #9.
NOTE:
See also the setpoint TimerChannel 9 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.

ComAp IG-NT Specifications

General

Brand	ComAp
Model	IG-NT
Category	Controller
Language	English