Communication Guide, ©ComAp – March 2014 80
IGS-NT Communication Guide 03-2014.pdf
200 m if setpoint Comms setting: CAN bus mode is set to 32C in controllers
900 m if setpoint Comms setting: CAN bus mode is set to 8C in controllers
eks
http://www.eks-engel.de/en/products/can-fiber-optic-konverter/
o DL-CAN/1x13 – Point to point
o DL-CAN/2x13 – Bus topology without redundancy
o DL-CANR/2x13 – Redundant link topology
Industrial converters with dual (redundant) power supply 12-30VDC. Alarm contacts available.
DIN mounting. Available multimode and single mode version.
To Next Page