ComAp InteliPro User Manual

InteliPro, SW version 1.4, ©ComAp –April 2014
InteliPro 1.4 Comprehensive Guide - rev. 1
2-13
The parameter I> T: I> T Curve allows also setting of other switching curves according to the IEC and
ANSI standards with the following shapes:
InteliPro I> T Curves
0,001
0,01
0,1
1
10
100
1000
1 10 100
I/Inom
delay [sec]
ComAp IDMT
ANSI mod
ANSI very inv
ANSI ext inv
IEC Inverse
IEC Very Inverse
IEC Extremly Inverse

ComAp InteliPro Specifications

General

Brand	ComAp
Model	InteliPro
Category	Relays
Language	English