IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
Actual active power imported from the mains. Method of the mains import
measurement is adjusted by the setpoint I/E-Pm meas.
Value: Q mains
Actual reactive power imported from the mains. Method of the mains import
measurement is adjusted by the setpoint I/E-Qm meas.
Value: Mains PF
Cos-phi factor at the mains inlet.
Value: Mains LChr
Character of the load as it is seen from the mains side at the mains inlet. "L"
means inductive load, "C" is capacitive and "R" is resistive load.
Value: Object P
Actual active power consumed by the object. This value is calculated as sum of
the genset active power and the active power imported from the mains.
Value: Object Q
Actual reactive power consumed by the object. This value is calculated as sum of
the genset reactive power and the reactive power imported from the mains.
To Next Page
Loading...
Need help?
General
