ComAp IS-NTC-BB Reference Guide

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
273
4
0
0
1
0
5
1
0
1
0
6
0
1
1
0
7
1
1
1
0
8
0
0
0
1
9
1
0
0
1
10
0
1
0
1
11
1
1
0
1
12
0
0
1
1
13
1
0
1
1
14
0
1
1
1
15
1
1
1
1
NOTE:
"0" in the table means the input is not active or not configured.
NOTE:
"Default" is the priority adjusted by the setpoint Priority.
Binary input: Priority sw B
Related FW
3.0
Description
This is one of four inputs Priority sw A, Priority sw B, Priority sw C and Priority sw
D that can be used for selection of the power management priority externally.
These inputs are optional and if not configured, the priority is then adjusted by the
setpoint Priority.
NOTE:
See encoding table in the description of the input Priority sw A.
Binary input: Priority sw C
Related FW
3.0
Description
This is one of four inputs Priority sw A, Priority sw B, Priority sw C and Priority sw
D that can be used for selection of the power management priority externally.
These inputs are optional and if not configured, the priority is then adjusted by the
setpoint Priority.
NOTE:
See encoding table in the description of the input Priority sw A.
Binary input: Priority sw D
Related FW
3.0
Description
This is one of four inputs Priority sw A, Priority sw B, Priority sw C and Priority sw
D that can be used for selection of the power management priority externally.

ComAp IS-NTC-BB Specifications

General

Brand	ComAp
Model	IS-NTC-BB
Category	Controller
Language	English