Loading System MkII Technical Data
17
Optional Items
The following items are not delivered as standard together with the Loading
System MkII but can be ordered separately if required, please see Figure 11
for visual clarification of the items.
Precast Kentledge (Art. 11655)
This precast concrete block is one out of three possible ballast options, and
can be ordered from Combisafe. Please see the following chapter Ballast for
more information.
Material: ..................................... Concrete
Weight: ....................................... 800 kg
Height: ....................................... 0,2 m
Width:......................................... 1,4 m
Depth: ........................................ 1,4 m
Formwork Support (Art. 11446)
To use the second ballast option, the Loading System MkII Base needs to be
equipped with 8 pcs of the Formwork Support. These channel section steel
bars with a wooden inlay will give the support needed to the side boards when
the base is filled with gravel or concrete.
Material: ..................................... Painted steel/wood
Weight: ....................................... 11 kg
Length: ....................................... 1,4 m
SkyReach Reach Hook (Art. 11530)
The Reach Hook is useful to guide the SkyReach Anchor into the Top Column
4.7/SkyReach Adaptor 5.9 when the anchor is lifted and lowered by crane. It
has a telescopic shaft which is extendable from 1,2 to 2,7 m.
Material: ..................................... Aluminum/Hot dip galvanised steel
Weight: ....................................... 1,0 kg
Length: ....................................... 1,2 – 2,7 m
To Next Page
Loading...