Loading System MkII Storage
37
Storage
Always store Combisafe products in a dry and ventilated area protected from
the effects of the weather and from corrosive substances.
Loading System MkII Base
The Loading System MkII is designed to ease storage when not in use. Since
the units can be packed flat, it is easy to store them in a stack. To make sure
the Loading System MkII is packed the correct way after usage, please place
the parts as in Figure 32 below. Make sure that the Feet are fully screwed in
and that the Top Frame is resting on the bottom plates in the Bottom Frame
Sleeves.
Figure 32. Loading System MkII Base in packed mode.
1. 2 x Combistraps
2. 4 x Formwork Supports on each side (8 Pcs tot.)
3. Top Column 4.7
4. 4 x Corner Post
A total number of 6 flat packed units can be placed together in one stack. On
each Top Frame there are four guide plates located to guide the next unit into
position.
To Next Page
Loading...