Loading System MkII Maintenance
43
SkyReach Anchor:
• Ensure that no drill holes have been made.
• Ensure that no corrosion that can affect the strength of the product has
occurred.
• Ensure there is no weld damage or deformation to any part of the product.
• Ensure that there are no damage to the Lifting Eyes neither to the welds
attached to the Eyes.
• Ensure that all bolts are tightened securely.
• Ensure that the Lock Pin is connected to the wire attached to the lower lug
on the mast, it is fitted correctly in place, and that it is not damaged or
deformed.
• Ensure the legibility of the product marking.
• Ensure that the Hook at the end of the brace is not damaged, and that it
can be smoothly placed into the lower lugs on the mast when performing
the mounting.
• Ensure that the Fall Arrest Block is completely secured to the Anchor
Point.
• Ensure that SkyReach Anchor is fully engaged into the Loading System
MkII unit and is free to rotate.
Personal Fall protection Equipment:
• Please follow the manufacturer´s recommendations for safety and
checking.
To Next Page
Loading...