Comdial DX-80 - Page 305

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-255
06-02-1~3-02-02 (VM Table – Prefix Table – No Answer, where 1~3 = Tenant Group)
• Press [save ].
• Press [chg].
• Input the required digits to identify this call as forwarded from this subscriber-no answer.
• Press [save ].
• Press [next ] to continue programming the various call handling digits (Prefix/Suffix).
• Press the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
06-02-1~3-02-02 (VM Table – Prefix Table – Direct, where 1~3 = Tenant Group)
• Press [save ].
• Press [chg].
• Input the required digits to identify this call as immediately from this subscriber.
• Press [save ].
• Press [next ] to continue programming the various call handling digits (Prefix/Suffix).
• Press the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
06-02-1~3-02-02 (VM Table – Prefix Table – CO Greeting, where 1~3 = Tenant Group)
• Press [save ].
• Press [chg].
• Input the required digits to identify this call to a specific CO Line.
• Press [save ].
• Press [next ] to continue programming the various call handling digits (Prefix/Suffix).
• Press the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
06-02-1~3-02-02 (VM Table – Prefix Table – CO Recall, where 1~3 = Tenant Group)
• Press [save ].
• Press [chg].
• Input the required digits to identify this call as a specific CO Line recalling.
• Press [save ].
• Press [next ] to continue programming the various call handling digits (Prefix/Suffix).
• Press the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
06-02-1~3-02-02 (VM Table – Prefix Table – UCD Overflow, where 1~3 = Tenant Group)
• Press [save ].
• Press [chg].
• Input the required digits to identify this call as a UCD Overflow Announcement.
• Press [save ].