Comelit UT1010 - Device Maintenance Procedures; Restarting and Resetting Devices

EN
14
MAINTENANCE
Restarting the device
To restart the module:
1. select it
2. right-click on the description (a pop-up with 5 sub-menus will appear)
3. select “Restart device” or
4. click which appears on the menu bar
Resetting the device
To restore the factory settings of the module:
1. select it
2. right-click on the description (a pop-up with 5 sub-menus will appear)
3. select “Reset device” (an alert/confirm procedure request window appears)
Resetting call button programming
To delete the call address programming for the module buttons:
1. select it
2. right-click on the description (a pop-up with 5 sub-menus will appear)
3. select “Reset Call Directory” (an alert/confirm procedure request window appears)