24
10''
3''
10 sec
1 2
1. Press the reset button for approximately 10 sec.:
» after 3 seconds you will hear a beep
» after 10 seconds you will hear a second beep
2. Release the reset button
» if the procedure was completed successfully, you will hear a confirmation tone; the red LED flashes and the button
backlighting comes on for the duration of the device restart procedure.
» if there is a device error you will hear an error tone.
Reset to factory values
Connection distances
If Art. UT8020 is powered directly from third-party standard POE switches, the maximum distance is reduced to 100 m.
MAX 150m
MAX 150m MAX 100m
IN (100Mb)
IN (100Mb)
OUT (10Mb)
OUT (10Mb)
6802W
6802B
6842W
6813W
6722W
6742W
6702W 6602W
6602B
1441
1441B
1440
UT8020
MAX 150m
To Next Page
Loading...
