Comelit UT8020 - Programming via ViP Manager

25
1440
Art. 1449
1441
POE
STANDARD
SWITCH
Programming via ViP Manager
All device configurations (with the exception of button module addressing) can be carried out via PC and ViP Manager
software, which is available to download free of charge from the website pro.comelitgroup.com.
For example:
• programming call addresses for the buttons
• activating audiovisual indications
• adjusting the backlighting and twilight sensor threshold
• adjusting volumes (speaker, microphone, voice messages, etc.)
• configuring video (zoom, horizontal and vertical shifting of the viewing area, colour, brightness, contrast, resolution)
• enabling and configuring the RTSP stream
• setting the functions that can be assigned to the RTE input (lock-release, priority call, actuator control, etc.)
• setting activations that can be assigned to the module SE outputs and relay
Connections available for programming via ViP Manager