2.13
Min return temperature / Min inlet temperature
With this function one can keep a basic heat
level in the circulation system even if there is
no heating requirement in the house as a whole.
Used when you want to have some heat even
though the room temperature is above the set value.
2.14
Holiday settings
The holiday function lowers the house's indoor
temperature by about 10 degrees during the number
of days entered. One day before the end of the
holiday period, the house starts to warm up.
If there is a heating requirement, the compressor
starts up and runs for 12 hours.
If the indoor temperature has not reached the desired
value, the additional heat is used so that the house
has the desired room temperature.
2.15
Diode list
The green diode list can be adjusted in brightness or turned off completely.
Go to "Advanced settings" / "General settings" / "LED list function" 0 = LED
list off, 1-6 LED list brightness.
To Next Page
Loading...