CommScope OneCell - Conventions

About this document
OneCell
®
Hardware Installation, Release 4.5 xv
D
R
A
F
T
Conventions
This guide uses the following text conventions, as applicable.
Table 2. Conventions
Convention Description
Syntax symbols
< > Enclose a required parameter or set of parameters. For
example:
>band-class <class>
<class>
is a required parameter.
[ ] Enclose an optional parameter or set of parameters. For
example:
>activate image <version> [reboot]
[reboot]
is an optional parameter.
| Separates items on a list of parameters, only one of
which can be used. For example:
>channel-included <yes|no>
A valid command is:
>channel-included yes
Font usage
Bold input font
Indicates text that must be entered exactly as shown. For
example:
Enter
ping 192.23.10.12.
Italic input font
Indicates a variable parameter for which you must
provide an actual value. For example:
>authentication key <aukey>
<aukey>
is a variable parameter.
A valid command is:
>authentication key 9782503000
Plain output font
Indicates system output in a command line or system-
generated file. For example:
IP address 192.23.10.12 is alive.
Italic output font
Indicates a variable in system output in a command line
or system-generated file. For example:
Installation of release <release> is
complete.