Chapter 6 RP2000 Installation
6-6 M0303A2 4.5.01 September 2020
D
R
A
F
T
3 Drill a 1/2-inch diameter hole for the Ethernet cable pass-through.
NOTE: Use a 1-1/2 deep RACO 8125 or equivalent.
4 Attach the octagon box to the ceiling bracket using a clamp and screw.
NOTE: CommScope recommends the Eaton B-line – BA50 bracket.
Hole for
mounting plate
1/2-inch
diameter hole
Octagon box
Screw
Drop ceiling
rail
Clamp
To Next Page
Loading...