8. Control system
38
8.9 Acknowledging warning /
fault messages
Warning and fault messages are shown in the third row of
the display. The red light signal flashes at the same time.
You will find a table containing messages and
suggested ways of remedying problems in the separate
DELCOS
Pro
operating instructions.
8.9.1 Warning messages
When there are warnings, the red light signal flashes
slowly. The unit does not automatically shut down when
there are warnings. However ignored warnings may
cause faults.
Rectify what is causing the warning and press the
key to hide the warning.
8.9.2 Fault messages
Fault messages result in the unit automatically shutting
down or do not permit the unit to be started.
Once you have rectified the problem, you still have to
confirm by pressing the key.
To Next Page
Loading...
Need help?
General
