Compaq Deskpro 4000 - Table C-5. Scanner Specifications; C.3.3 Scanner Specifications;Requirements

Appendix C Keyboard
Compaq Personal Computers
Changed - November 1996
C-20
C.3.3 SCANNER SPECIFICATIONS/REQUIREMENTS
Table C–5.
Scanner Specifications
Table C-5.
Scanner Specifications
Parameter Specification [1]
Dimensions (Complete keyboard unit):
Width
Height
Depth
20.5 in (52.07 cm)
2.5 in (6.35 cm)
9 in (22.86 cm)
Weight (Complete keyvoard unit) 10.1 lb (4.58 kg)
Scanner Paper Sizes:
Minimum
Maximum
2.0 x 3.0 in (5.1 x 7.6 cm)
8.5 x 30 in 21.6 x 76.2 cm)
Maximum Scanned Resolution (input) 2400 x 2400 dpi
Maximum Scanning Resolution (output) 400 dpi
Maximum Scan Time (8.5 x 11” sheet) 6 seconds [2]
Power Requirements (Scanner only):
Input Voltage
Maximum Current Drain (scanning)
24 VDC
990 ma
Environmental Conditions:
Tempurature, operating
Tempurature, non-operating
Humidity, operating
Humidity, non-operating
50
°
-104
°
F (10
°
-40
°
C)
-4
°
-140
°
F (-20
°
-60
°
C)
20-80% RH
5-95% RH
NOTE:
[1] Metric numbers shown in parenthesis.
[2] Based on Pentium/90-based system w/16 MB RAM
The scanner imposes the following requirements on the host system:
♦ 486 or better microprocessor
♦ Serial port
♦ Windows 3.1, Windows for Workgroups 3.11, or Windows 95 or later
♦ 4 megabytes of RAM (8 megabytes recommended)
♦ 50 megabytes free disk space