PTY OFF Parity Checking enabled
WP OFF Write protect disabled
SP0 ON Spin up with Start Unit Command
SP1 OFF Spin up delay disabled
W4 ON LED on PCBA is enabled
W3 ON Drive provide BUS termination power
W2 OFF Termination power provided by Host
W1 OFF Drive provide local termination power
W10 OFF Slave Sync Termination enabled
W11 OFF Master Sync Termination disabled
===========================================================================
Table 6-19. 1.05 GB Fujitsu Hard Drive Jumper Options (Shipped
configuration shown)
===========================================================================
To Next Page
Loading...
