19
•
•
•
•
•
•
Operation 3
This chapter describes the operation of the different TraceCase devices:
Trace Case
TraceCase Fi t
TraceCace Fit 2
3.1 Device Status LED
The device status is indicated by LED Signals. You find the LED:
■ Above the button at the front of TraceCase ( Figure ‘Front view of TraceCase’).
■ Next to the button at the left or right side of TraceCase Fit, depending on the smart‐
phone type.
■ On the back of TraceCace Fit 2 ( Figure ‘TraceCace Fit 2 with smartphone (back)’).
Charge the battery at least for six hours before first use.
When using TraceCase, keep in mind that possible sources of interference
may affect the result of a trace. Sources of interference can be, for example,
other WLANs or an active Bluetooth connection.
To Next Page
Loading...