COMPRION TraceCase - Tracecase Web Interface; Opening the Web Interface

3.6 TraceCase Web Interface
27
•
•
•
•
•
•
3.6 TraceCase Web Interface
TraceCase provides the TraceCase Web Interface for using the device without Trace‐
Case App installed on a smart phone. This can be especially useful for in‐house setups
when you can work with the Web GUI on a PC.
3.6.1 Opening the Web Interface
► Switch on your TraceCase device.
► Open a Web browser on the device that is connected to your TraceCase device via
WLAN.
► Open the TraceCase Web Interface in the browser by entering the following URL:
http://<IP address of the TraceCase device>
■ In access point mode ( [TraceCase App]), the default IP address of the Trace‐
Case device is 192.168.200.1. If the IP address was previously changed, you
must use this changed address instead.
■ In client mode, the TraceCase device obtains its IP address from the DHCP
server and can be reached via this IP address. If necessary, you must request the
IP address from the network administrator. The network administrator can also
assign a static IP address to the TraceCase device via its MAC (media control
access) address.
If the WLAN to which the TraceCase device logs on supports Link‐Local Multi‐
cast Name Resolution (LLMNR) or multicast DNS (mDNS), the TraceCase device
can also be reached by its name. Then, you must enter the URL http://tracecase-
<serial number>. You find the serial number on the nameplate of the device
(
 Product Indication, ‘s/n:’). You must enter the serial number without spaces.
For example, for ‘12345 67890’ enter http://tracecase-1234567890.
Most features of the TraceCase Web Interface correspond to the features of
TraceCase App. For information about these features and the parameters, see
the descriptions in
 [TraceCase App].
For using TraceCase Web Interface, you need a device (smartphone, tablet, or
PC) with a JavaScript‐enabled Web browser.