1
•
•
•
•
•
•
Introduction 1
These operating instructions summarize basic information concerning safety and opera‐
tion of the
Trace Case, TraceCase Fit, and TraceCace Fit 2 test tools.
Operating instructions are part of the user documentation together with the software
user manuals and application notes. Please refer to the relevant COMPRION documents
available on our support page (support.comprion.com).
1.1 Intended Usage
TraceCase, TraceCase Fit, and TraceCace Fit 2 are the small and handy test tools for dis‐
creetly tracing contactless transactions under real‐life conditions. The mobile trace tools
come with powerful analyzing software that supports debugging in the best possible
way.
Observance of the operating instructions is regarded as part and parcel of proper use.
In case of disturbances that might endanger safety, do not hesitate to contact
COMPRION immediately.
1.2 Foreseeable Misuse
Accessories must be exclusively purchased from COMPRION. If you install other acces‐
sories, guarantee will become invalid. COMPRION accessories have load limits that are
suited to the way the component is used (as stated in the relevant documentation). Make
sure to observe these load limits before you place something on the accessories.
Replacement parts must meet the technical requirements specified by
COMPRION! Make sure only to use original replacement parts.
In case of unintended usage, guarantee becomes invalid. The risk is born solely
by the user.
To Next Page
Loading...