COMPRO IP55 - Event Setup; Event Server Setup

6-10 Event Setup
Compro IP55 / 60 / 70 Network Camera
Event Setup
When an event happens, like detected motion or triggered I/O device, a snapshot can be instantly sent to
your E-mail account, ftp server, image server, notification server, HTTP server, or SMS server to warn you
about what’s happened.
In order to properly set up the event function, you must:
1. First set up the event server based on your needs: E-mail, FTP, Image or ComproView Notication.
2. Once the event servers are congured, you can then go to the trigger setup to congure the type of
event, motion, schedule and the associated even actions.
3. In the motion detection page, you can set up the region and the sensitivity for detection.
4. If you want to use the I/O input, please connect the I/O devices before event setup.
Event Server Setup
Here provides the configurations of 6 different event servers including E-mail, FTP, Image or ComproView
Notify, HTTP, and SMS. Please click on the event server you want to configure and input necessary
information.
Email server
This supports standard SMTP on SSL-protected webmail platforms such as Hotmail (Windows Live) and
Google Mail (Gmail). To use this function, in [Event Server Setup] > [Email Event Server Setup], enter their
SMTP address and SSL port respectively. Then enter your user name and password, and the E-mail subject
as you wish.
As of August 2010, SMTP and SSL settings for Hotmail and Gmail are as follows:
Platform SMTP SSL
Hotmail smtp.live.com 587
Google Mail smtp.gmail.com 465
Table 6-1. Webmail setting
In [Authentication Method], select [Login]. Enter a complete email address in [User Name] field:
xxxx@xxxx.com. Other SSL webmail platforms are not tested.
FTP server
Here provides the conguration for the FTP server that will receive snapshot taken at the occurrence of
triggered events by the camera.
Image server
This allows you to set the name of the saved snapshots taken by the camera when an event is triggered.
Notify server
Here is for entering the message that noties ComproView of an event being triggered. This feature is
meant for integration with ComproView.
HTTP server
The HTTP URL entered here is meant for the camera to use HTTP protocol to send a notication message
to the HTTP server used by NVR when an event is being triggered.