Compur Monitors Statox 503 - Warning Signs

Statox 503 Control Module
Page 4 of 46 Issue 10 / 2018
Safety notes
 Read and observe this manual prior to installation and start-up.
 The Statox 503 Control Module is only allowed to operate under the given ambient conditions (see
Technical Data). In particular, it must not be operated in potentially explosive atmospheres!
 The Statox 503 Control Module must be operated, maintained and repaired by trained and expert
personnel only. Use only Compur Monitors original parts for repair and maintenance.
 Do not connect the module directly to mains!
 Do not modify the product. Do not use if damaged or incomplete.
 When installing this product observe all local standards and regulations.
 Disregarding of the above points represents a danger to people and property.
Warning Signs
Potential Danger
Note on an immediate danger to people and property.
Advice
Extra information for the proper use of the product.
!
!