Compur Monitors Statox 506 - Maintenance and Cleaning Guidelines; Accessories and Spare Parts Listing

24
8 Maintenance and Cleaning
 Clean Statox 506 with a humid cloth. Do not apply detergents, solvents or pressure washers.
 Perform visual inspection on a regular schedule. Check for mechanical damage, intact washers and
pollution. The gas access opening must be clean and free of obstacles.
 In harsh environment the installation of a splash guard might be recommendable. The instrument must
be calibrated with the splash guard then. In case of doubt ask you local Compur representative.
 If you use Statox 506 as a SIL device according to standard DIN EN 61508, additional functional tests
are required (see chapter 11).
9 Accessories and Spare Parts
Description
Article number
Statox 505/506 calibration adapter
570505
Statox 505/506 calibration/diffusion adapter
570547
Statox 505/506 splashguard
570560
Pipe kit 1“ for clamping range 32-37 mm
516464
Pipe kit 1,5“ for clamping range 48-53 mm
516462
Pipe kit 2“ for clamping range 59-63 mm
516460
Intrinsically safe repeater (current source) for 2- and 3-wire connection
(Stahl Type 9160/13-11-11s)
803360
Gas tube 1m
556710
Statox 505/506 sensor head filter holder
570510
Statox 505/506 O-ring set
570598
Sensor details and technical data see chapter 12.2 !