Comtec ZDR-024CE - Page 60

60
Using parking surveillance mode (optional)
One time parking surveillance mode function
• When the parking surveillance mode setting is OFF, parking surveillance
mode can be turned on temporarily by pressing and holding the OK button.
• From the point when the OK button is pressed and held, parking surveillance
PRGHZLOOVWDUWHYHQDIWHUWKHYHKLFOHNH\VZLWFKLVWXUQHGRႇ
• Recommended for use when using parking surveillance mode only when you
are outside.
Advice
• The detailed settings for normal parking surveillance mode are reflected for parking surveillance
mode in "one time parking surveillance mode".
• "One time parking surveillance mode" is cancelled by turning on the vehicle key switch and the main
unit power source. It then returns to the settings which are set in "parking surveillance mode setting".
Parking surveillance mode pass function
• Even when the parking surveillance mode setting is [ON], pressing and
holdingWKH2.EXWWRQZLOOWXUQRႇSDUNLQJVXUYHLOODQFHPRGHWHPSRUDULO\
In addition, operating while parking surveillance mode is in operation will
allow parking surveillance mode to end.
• Recommended for use when parking at locations where this product may
detect impacts, such as mechanical multistory parking garages and at
locations where there are many vibrations, and on days with strong wind.
In cases where the [Parking surveillance recording method] setting is set as [Impact quick
recording], the parking surveillance mode pass function cannot be used because operation
LVVWRSSHGVOHHSZKHQWKHYHKLFOHNH\VZLWFKLVWXUQHGRႇ
* Parking surveillance mode pass function can be used while recording a detected impact.
Advice
"Parking surveillance mode pass function" is cancelled by turning ON the vehicle key switch and the
main unit power source. It then returns to using the settings in "parking surveillance mode setting".