CONFIGURING
THE ALARM
UGC007/0702 Basic 32 Loader Control
OPERATION 4-9
Te loader can be configured for demand alarm, fill alarm or no
alarm.
To configure the alarm from the main screen:
Use the Up/Down arrows to scroll to
Loader Config.
Press the Enter arrow.
The Loader Configuration screen displays. Use the
up/down arrows to scroll to Alarms.
Press the Enter arrow.
The Alarm Configuration screen displays. Use the
scroll down/up buttons to choose the alarm config-
uration you want:
● No alarm
● Demand alarm
● Fill alarm
Press the Enter arrow to save the change.
Press the Previous button to return to
the last screen you were viewing, or the Main
button to return to the Main screen.
1
2
3
4
5
To Next Page
Loading...