Conair Basic 32 Loader Control B32 - CPU Faults; I;O Errors

UGC007/0702 Basic 32 Loader Control
TROUBLESHOOTING 6-9
I/O ERRORS
WARNING: Electrical shock hazard
Diagnosing electrical and processor problems
require access to the electrical enclosure while
power is on. Only qualified electrical technicians,
who are trained in how to avoid voltage hazards,
should perform troubleshooting procedures that
require access to the B32 Input/Output enclo-
sure while power is on.
Error
Possible cause Solution
See APPENDIX D: “FAULT MESSAGES AND ERROR CODES” for a complete listing of
input/output errors, causes and solutions.
CPU FAULTS
WARNING: Electrical shock hazard
Diagnosing electrical and processor problems
require access to the electrical enclosure while
power is on. Only qualified electrical technicians,
who are trained in how to avoid voltage hazards,
should perform troubleshooting procedures that
require access to the B32 Input/Output
enclosure while power is on.
Error/Alarm
Possible cause
Solution
See APPENDIX D: “FAULT MESSAGES AND ERROR CODES” for a complete listing of
CPU faults, causes and solutions.