UGC007/0702 RESTORING THE PROGRAM
APPENDIX B1
The program can be restored to the plant configuration if for
some reason the program has been interrupted.
To restore the program:
Use the Up/Down arrows to scroll to
Loader Config.
Press the Enter arrow.
The Loader Configuration screen displays. Use the
up/down arrows to scroll to Save Config
Press the Enter arrow.
The Save Configuration screen displays. Use the
scroll up/down buttons to select Program Mode.
Press the Enter arrow to save the change.
Press the Previous button to return to
the last screen you were viewing, or the Main
button to return to the Main screen.
RESTORING THE
PROGRAM
1
2
3
4
5
To Next Page
Loading...