4
O p e r a t i o n
C o n t r o l Fun c ti o n D es c ri p ti o ns -
S t a n d Al o ne Co n f i g u r a t i o n ( c on t in u e d )
Delivery Air Setpoint Setup screen
To access the Setpoint Setup screen:
1 Press the Settings button from the Home screen.
2 Press the Delivery Air Setpoint Setup button.
The Delivery Air Setpoint Setup screen provides the user with the ability change the set-
point for the Hopper Heater (or other delivery air heat device).
To change the setpoint:
1 Press the text inside white box
with thick black outline of the
setting you would like to change.
2 Use the keypad to enter the new setting. Setting range will be
displayed at the bottom of the pop up keypad.
NOTE: Proper login is
required to change
these settings.
✐
O p e r a ti o n l 4 - 7 3
To Next Page
Loading...
Need help?
General
