Conair Carousel Plus W Series - Page 68

4 - 3 4 l Op e ra ti o n
C o n t r o l Fun c ti o n D es c ri p ti o ns - R W
C o n f i g u r a ti o n (c on t in u ed )
Ethernet Setup screen
To access the Ethernet Setup
screen:
1 Press the Settings button
from the Home screen.
2 Press the Ethernet Setup button.
The Ethernet Setup screen provides the user with the ability to view current HMI Ethernet
settings, load factory default Ethernet settings, or to change and apply new Ethernet set-
tings.
To load the factory default Ethernet settings:
1 Press the Load Factory Default Ethernet Settings button.
2 Press the button to confirm that you want to load the factory
default settings. Press the X button if you want to exit without
loading the default factory settings.
NOTE: Proper login is required to
change these settings.
✐
(continued)
NOTE: The default IP
address established by
Conair is 10.1.12.1
✐