Conair Carousel Plus W Series - Page 69

4
O p e r a t i o n
C o n t r o l Fun c ti o n D es c ri p ti o ns - R W
C o n f i g u r a ti o n (c on t in u ed )
Ethernet Setup screen
To apply new Ethernet settings:
1 Enter the new settings in the white boxes with
thick black borders. When you touch the setting
inside the box, a pop up number pad will appear.
2 Use the number pad to enter the new setting.
Press the enter button on the number pad to enter the
new setting.
3 Repeat steps 1 and 2 for each address setting.
4 Press the Apply NEW Ethernet Address
Settings Now button.
5 Press the button to confirm that you want to apply the new
settings. Press the X button if you want to exit without apply-
ing the new settings.
NOTE: Proper login is required to
change these settings.
✐
(continued)
O p e r a ti o n l 4 - 3 5